Infortrend EonStor 2U/12-bay 2 x FC-4G to SAS/SATAII RAID Bluefish 444 certified

 Download Datasheet - Download RAIDWatch Datasheet - Ask Question

The S12F-G1420 4Gb Fibre Channel to Serial Attached SCSI (FC-4G-to-SAS), single controller RAID subsystem has passed qualification testing with the SD|Greed, HD|Lust, and HD|Fury video I/O cards from Bluefish444. The ES S12F is certified for use in broadcast-quality applications such as post-production, HDTV, 2K film, digital cinema, near-line digital content, and broadcast server archives.

Specifications 

RAID

• Multiple arrays configurable with dedicated or global hot spares
• Supports RAID 0, 1 (0+1), 3, 5, 6, 10, 30, 50, 60, and NRAID
• Infortrend Smart Technologies
• IOSmart Technology
• DrvSmart Technology
• SysSmart Technology

Subsystem Components

Redundant, hot-swappable components designed for no single point of failure

• One (1) EonStor enhanced 2U enclosure
• Twelve (12) hot-swappable drive trays
• Two (2) chassis ears (with finger grips on S12F-R1420-0030)
• One (1) LCD keypad panel
• Two (2) or one (1) RAID controller module(s)
• 512MB DDR RAM DIMM module pre-installed on each RAID controller
• STwo (2) standard or optional battery backup unit (BBU)
• Two (2) hot-swappable, redundant, 405W power supply units (PSUs)
• Two (2) redundant cooling modules each with two (2) dual-speed fans

Host Interface

• Two (2) FC-4G host channels per controller
• Auto-negotiate FC-AL, point-to-point, or switched fabric
• Concurrent I/O commands
• Tagged command queuing up to 256
• Variable stripe size per logical drive
• Optimization setting for random or sequential I/Os

Drive Interface

• Twelve (12) hot-swappable drive trays that accommodate 1-inch pitch, 3.5-inch SAS/SATA disk drives
• Native Command Queuing (NCQ) support
• Dedicated bandwidth to each connected drive
• Automatic bad sector reassignment

Management

• Firmware-embedded utility via LCD keypad or RS-232C port
• Host-side SES emulation with pass-through to back-end SES emulation
• 10/100 BaseT Ethernet for out-of-band management
• Two (2) COM ports for local access to firmware-embedded utility and UPS connectivity
• Firmware-embedded Java-based RAIDWatch Manager:
• VT-100 terminal emulation via RS232 serial port
• Telnet access via onboard Ethernet port
• Cross-platform, remote administration with SSL
• Out-of-band access via Ethernet (GUI-onboard)
• Centralized management to monitor and administer multiple RAID units on one screen
• Configuration Client for easy access to the configuration utility screen
• SNMP 2.0 MIBs with get and set commands

SAN Management

Up to 1024 LUNs (if sufficiently large memory is used with the proper settings)

Indicators

• Onboard alarm is triggered when one of the following fails:
• RAID controller module
• Cooling module
• Power supply unit
• Hard drive
• BBU module
• Module status LED indicators :
• Three (3) per LCD keypad panel
• Two (2) per drive tray
• Eleven (11) per RAID controller module
• One (1) per BBU module
• Two (2) per cooling module
• One (1) per PSU
• Module failure alert through I²C bus
• Event notifications sent over email, fax, LAN broadcast, SNMP traps, MSN messenger, ICQ, SMS short messages
• System alerts through Java-based RAIDWatch Manager